Case studies

Cleaning of cooling fins on CNC machines

Cleaning of 13 units of heat exchangers (heaters) in a tool shop and cleaning of cooling fins on CNC machines for metal processing; use of dry snow cleaning technology.

Cleaning welding tools with dry snow

Cleaning of five sets of complex welding tools for use in the automotive industry. Thoroughly cleaned of all grease, scale, heat-resistant traps, soot and impurities with dry ice.

Dry ice pool cleaning

Cleaning and descaling with impurities in the pool where the turbine cooling water (10m3) is stored with dry ice.

Cleaning the ventilation system

Cleaning and disinfection of the ventilation system (632m long), robotic cleaning of the ducts with continuous suction and filtration (HEPA filters), recording of the condition of the inside of the ducts before and after the cleaning.

Sandblasting Ferarri 330 GTO with soda

Sandblasting of an old-fashioned Ferarri 330 GTO with soda - removal of paint and filling layers (putty) from the entire body and body parts.

Climate restoration

Disassembly from the building, disassembly of the air conditioner, sandblasting and painting of housings, replacement of worn vital parts, balancing of the rotor, assembly and installation and test start-up.

Rehabilitation of a holiday facility after a fire

Post-fire remediation by dry ice cleaning process. Thoroughly cleaned soot, burns, impurities and unpleasant odors from 200m2 of surfaces.