Dry ice Cleaning

Advantages

  • completely dry (no water), clean technological process
  • cleaning ensures a longer component life and more reliable machinery operation
  • spreading dirt around production facilities can be prevented with a chamber for instant dirt extraction and filtration during cleaning.
  • even hard to reach spots can be cleaned (corners, slots, bores...)
  • after the cleaning, the devices are immediately ready to start

Area of use

  • sensors and detectors
  • air and lubricant pipes
  • motors, drive components, and reduction gears
  • chains and belts
  • plastic and other housings
  • control panels
  • sliding and rotating elements (hinges, bushings, shafts...)

Abrasive blasting

Advantages

  • optimum surface preparation for Teflon coating, wet and powder coating, or metallisation
  • sandblasting to achieve adequate roughness
  • different paints, zinc, or dirt can be removed from surfaces
  • the blasting process complies with the ISO 9001 quality control standard

Area of use

  • reservoir scaffolds and constructions

Blasting media

  • steel grit
  • stainless steel (inox) grit
  • white/brown electro corundum
  • crushed glass

Non-abrasive blasting

Advantages

  • the blasting process complies with the ISO 9001 quality control standard
  • removal of surface dirt, paint or protective coatings
  • blasting with non-abrasive media, such as sodium bicarbonate, plastic blasting media (UREA and Melamine), for removing paint coatings or dirt without changing the surface structure
  • different paints, zinc, or dirt can be removed from surfaces

Blasting media

  • sodium bicarbonate
  • plastic (UREA or Melamine)

Shot Peening

Advantages

  • improved mechanical characteristics of different parts
  • removing unwanted surface tension
  • achieving appropriate sliding characteristics of the surface
  • improved lubricating characteristics of individual parts
  • greatly reduced possibility of micro cracking

Area of use

  • for lines and machinery assemblies susceptible to wear and tear
  • springs, moving parts
  • gears

Laser Cleaning

Advantages

  • higher level of clean lines
  • no blasting media required - just electricity
  • easy integration of an automated production line
  • no dust and low noise levels

Area of use

  • mould cleaning
  • precise paint removal on demand
  • aluminium cast laser cleaning

Painting

Advantages

  • surface protection against chemical reactions

Area of use

  • scaffolds
  • constructions
  • exterior of baking machinery
Would you like to discuss your project?
Enter your contact information and we will contact you at your earliest convenience.