Dry Ice Cleaning

Advantages

  • clean and dry surface immediately after cleaning - dry cleaning
  • no damage on a surface
  • ceans hard to reach places
  • prolong equipment lifetime
  • no need for disassembling of the equipment
  • environmentally friendly – no waste

Area of use

  • electronics (sensors, detectors)
  • pipes (air and oil)
  • motors and transmision parts
  • plastic and other castings
  • control panels
  • lenses

Entries and installation of process equipment

Advantages

  • many years of experience with the most demanding pharmaceutical lines
  • entered over 50 lines, 0 errors
  • we provide a comprehensive service until the installation on the microlocation
  • performance guarantee

Area of use

  • packing lines
  • equipment and device input services
  • repairs, renovations, relocations

Abrasive sandblasting

Advantages

  • paint, burns, and other stubborn dirt are removed from the surface
  • sandblasting meets the ISO 9001 quality control standard
  • optimum surface preparation for Teflon coating, wet and powder coating, or metallisation
  • sandblasting to achieve precise roughness

Area of use

  • reservoir and reactor scaffolds and constructions
  • equipment components
  • piping interior
  • reservoir and reactor interior and exterior
  • machinery renovation - tablet press machines

Shot Peening

Advantages

  • improved lubricating characteristics of individual parts
  • greatly reduced possibility of micro cracking
  • improved mechanical characteristics of different parts
  • achieving appropriate sliding characteristics of the surfac
  • removing unwanted surface tension
  • high series capacity

Area of use

  • for lines and machinery assemblies susceptible to wear and tear
  • gears
  • springs, moving parts

Laser Cleaning

Advantages

  • easy integration of an automated production line
  • no blasting media required - just electricity
  • no dust and low noise levels
  • higher level of clean lines

Area of use

  • aluminium cast laser cleaning
  • augers, mixer cleaning
  • precise paint removal on demand
  • mould cleaning

Painting

Advantages

  • surface protection against chemical reaction (iron, stainless steel - inox, aluminium)

Area of use

  • scaffolds
  • constructions
  • machinery exteriors
  • mills for crushing raw materials/pigments

Metallisation

Advantages

  • increase production efficiencies – lower downtime
  • the best corrosion protection
  • basic material protection from environmental conditions
  • environmentally friendly – no waste

Area of use

  • furnaces
  • critical construction components
  • mixers
  • components exposed to wear and tear
Would you like to discuss your project?
Enter your contact information and we will contact you at your earliest convenience.