Dry ice Cleaning

Advantages

  • completely dry (no water), clean technological process
  • substitute for manual cleaning with harmful chemical solvents
  • no need for costly equipment – not causing damage
  • no need to disassemble the cleaning equipment in most cases

Area of use

  • generators
  • high voltage insulators
  • turbine blades
  • electrical cabinets
  • electric motors
  • heat exchangers
  • combustion chambers

Non-abrasive blasting

UREA, melamine, or sodium bicarbonate plastic blasting media are used for non-abrasive blasting. This type of blasting is used for paint removal.

Advantages

  • paint removal without damaging the material surface due to the hardness of the blasting medium 2.5-3.5 MOHS
  • paint removal from shot peened parts without diminishing or cancelling the shot peening effect
  • environmentally friendly method - using recycled plastic
  • no use of paint-dissolving chemicals

Area of use

  • paint removal from different materials (aluminium, composites, plastic, steel, fibreglass)

Dry or wet blasting

Glass pearls are used for dry or wet blasting in the electro industry.

Advantages

  • blasting without deformation of the workpiece
  • deep cleaning of uneven surfaces and bores
  • no need for polishing
  • reducing the adherence of dirt by polishing the surface

Area of use

  • ALU or stainless steel (inox) interior and exterior components
  • components produced with 3D printers
  • pipe interior
  • aluminium spare parts

Shot Peening

Advantages

  • material breaking and notch effect less likely to occur
  • removing surface tension
  • increasing material resistance to dynamic stress
  • 1000% longer material life

Area of use

  • turbine blades
  • shafts
  • various types of springs
  • safety assembly parts
  • components with dynamic load

Laser Cleaning

Advantages

  • no blasting media required - just electricity
  • no damage to basic materials
  • point-precise cleaning
  • low noise level
  • for use in sensitive environments
  • reduces susceptibility to corrosion after laser cleaning
Would you like to discuss your project?
Enter your contact information and we will contact you at your earliest convenience.